Introducción
Usa esta guía para remover y reemplazar la pantalla de un Huawei P8.
Qué necesitas
-
-
Primero apaga tu teléfono
-
Remueve las bandejas para la tarjeta SD y la tarjeta SIM.
-
-
-
Remueve los dos tornillos Torx T2 ubicados en la parte inferior al lado del puerto Micro USB del dispositivo.
Pour ma part le Huawei P8 que j’ai démonté comprenait des vis T3 et non P2 ainsi qu’un port micro USB et non USB type C.
-
-
-
-
Remueve la cinta adhesiva que cubre el cable flexible de pantalla.
-
Suelta el adhesivo alrededor del marco medio con un iOpener.
-
Cuando el pegamento se ablande puedes usar un spudger para llegar detrás de la pantalla a través del compartimiento de cámara y llegar entre el marco y la pantalla.
-
Para volver ensamblar tu dispositivo, sigue estas instrucciones en orden inverso. Vuelve a aplicar adhesivo donde sea necesario.
Para volver ensamblar tu dispositivo, sigue estas instrucciones en orden inverso. Vuelve a aplicar adhesivo donde sea necesario.
Cancelar: No complete esta guía.
10 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
2 comentarios
Is there any difference on screen frame between GRA-L09 and GRA-TL10??? The l09 is the single sim and the TL10 is the dual sim…
installing a new screen the first time, i was looking at darkness. then, taking it apart again and taking away the protective foil on the back of the screen, it just showed pink/purple colors and started heating up pretty bad around the charging connector. my idea would be a short circuit. any idea what is going wrong and can this still be saved?