Saltar al contenido principal
  1. In this guide, the wrist band of the Polar V800 is removed for a clear view of the back panel. If you find it helpful, you may want to remove the wrist strap. Please reference the Watch Band Replacement guide for removal instructions if you wish to do so. Ensure your Polar V800 sports watch is powered off before continuing.
    • In this guide, the wrist band of the Polar V800 is removed for a clear view of the back panel. If you find it helpful, you may want to remove the wrist strap. Please reference the Watch Band Replacement guide for removal instructions if you wish to do so.

    • Ensure your Polar V800 sports watch is powered off before continuing.

    • Remove the eight, 7.4 millimeter-long screws on the back of the watch with a T5 head-type, torque screwdriver.

  2. Gently separate the watch housing from the back panel. The watch should come apart easily after removing the screws. If you experience difficulties separating the housing and and back cover, use a spudger to gently pry apart the back panel and the button and screen protector housing. The watch should come apart easily after removing the screws. If you experience difficulties separating the housing and and back cover, use a spudger to gently pry apart the back panel and the button and screen protector housing.
    • Gently separate the watch housing from the back panel.

    • The watch should come apart easily after removing the screws. If you experience difficulties separating the housing and and back cover, use a spudger to gently pry apart the back panel and the button and screen protector housing.

  3. The waterproofing seal is the red, elastic band that surrounds the display of the watch. Remove the waterproofing seal.
    • The waterproofing seal is the red, elastic band that surrounds the display of the watch.

    • Remove the waterproofing seal.

    • During reassembly, align the red seal in the groove surrounding the glass screen on the main watch housing to ensure a watertight seal.

  4. Though not necessary,  following the Polar V800 Display Replacement first may make the motherboard easier to remove. Remove the nine, 4.0 millimeter-long screws with a T5 head-type torque screwdriver. Remove the nine, 4.0 millimeter-long screws with a T5 head-type torque screwdriver.
    • Though not necessary, following the Polar V800 Display Replacement first may make the motherboard easier to remove.

    • Remove the nine, 4.0 millimeter-long screws with a T5 head-type torque screwdriver.

  5. Once all of the screws have been removed, lift the motherboard to expose the battery beneath motherboard.
    • Once all of the screws have been removed, lift the motherboard to expose the battery beneath motherboard.

    • A red wire and a black wire should run between the motherboard and the battery.

  6. The battery is glued down to the back of the watch. It may take some force to detach the battery at the glue joint.
    • The battery is glued down to the back of the watch. It may take some force to detach the battery at the glue joint.

    • Use a spudger to pry the battery from the back of the watch.

    • If your battery is swollen, be very careful in removing the battery. If the packaging is ruptured, the battery will be unsafe to handle with bare hands. The contents of the battery are hazardous.

  7. Gently pull the wires from their solder joints to disconnect them from the body of the watch.
    • Gently pull the wires from their solder joints to disconnect them from the body of the watch.

    • If the wires do not come off easily, you may need to desolder the connections. Visit Cómo soldar y desoldar conexiones for more help on soldering.

    • To reconnect the wires to their solder joints, they must be soldered on. See the guide linked above for more guidance.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Jarod Lyles

Miembro Desde 18/04/18

716 Reputación

5 Guías creadas

Equipo

Cal Poly, Team S17-G6, Livingston Spring 2018 Miembro de Cal Poly, Team S17-G6, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G6

4 Miembros

6 Guías creadas

Where can the replacement motherboard be bought? Thanks

Randall - Contestar

Bonjour et merci pour ses photos ezt explication, mais savez vous ou commander le joint rouge entourant et faisant l “ étanchéité de celle ci. Merci

facebook - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 12

Últimos 30 Días: 46

Todo El Tiempo: 606