Open the rear cover of the Saeco Exprelia

Introducción

Most repairs start with the removal of the rear cover. This one is fastened with two screws on the bottom and two bayonet-like locks on the top

Remove all accessory parts like the water reservoir, the brewing assembly as well as the drip try.
Remove all coffee beans from the bean container
Always remove the power cord
Remove the two T10 Torx screws from the bottom of the rear cover.

Pull the back cover approximately 1 cm (3/8inch) out from the bottom and push it in an upward direction.

Conclusión

To reassemble your device, follow these instructions in reverse order

Un agradecimiento especial a estos traductores:

de en

100%

oldturkey03

¡ oldturkey03 nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Miembro Desde 10/19/15

205,513 Reputación

250 Guías creadas

Community

25 Miembros

1,152 Guías creadas