Introducción

If there is any problem with the phone that you plan to repair, removing the battery is the first step in completing the repairs and is critical for safety while working on the phone.

If your battery is swollen, take appropriate precautions.

  1. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.
    • Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.

  2. Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.
    • Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Lift up and remove the back panel. Lift up and remove the back panel. Lift up and remove the back panel.
    • Lift up and remove the back panel.

  5. After removing the back panel, use the             spudger to lift and detach the Battery Flux Cable from the Motherboard. After removing the back panel, use the             spudger to lift and detach the Battery Flux Cable from the Motherboard.
    • After removing the back panel, use the spudger to lift and detach the Battery Flux Cable from the Motherboard.

  6. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.
    • Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.

Conclusión

To reassemble your device, follow these instructions in reverse order.

After completing this guide, calibrate your newly-installed battery.

10 personas más completaron esta guía.

Jack Haseman

Miembro Desde 19/03/18

1,282 Reputación

6 Guías creadas

Equipo

Baylor, Team S3-G2, Williams Spring 2018 Miembro de Baylor, Team S3-G2, Williams Spring 2018

BU-WILLIAMS-S18S3G2

4 Miembros

6 Guías creadas

my moto e4 plus screen is freezing , how can we unfreeze please advise

rajamfaisal - Contestar

This is the only tutorial that looks like my phone inside, even tho they’re all supposed to be Moto E4 Plus. All the ones on YouTube look different, screws in different places, etc.

Brad Rathernotsay - Contestar

Hi Brad,

Motorola released a few variants of Moto E4s. You can compare phone’s model number to figure out exactly which model you have. We unfortunately don’t have all the Motorola guides covered at this point, but we’re working on it!

Arthur Shi -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 12

Últimos 7 Días: 72

Últimos 30 Días: 344

Todo El Tiempo: 4,162