Saltar al contenido principal

Microsoft Surface Pro 5 Kickstand Replacement

Qué necesitas

  1. Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: paso 1, imagen 1 de 3 Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: paso 1, imagen 2 de 3 Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: paso 1, imagen 3 de 3
    • Lift the kickstand about 90º to reveal the hinges.

  2. Microsoft Surface Pro 5 Kickstand Replacement: paso 2, imagen 1 de 2 Microsoft Surface Pro 5 Kickstand Replacement: paso 2, imagen 2 de 2
    • Remove the four 2.7 mm T3 Torx screws, two from each hinge.

  3. Microsoft Surface Pro 5 Kickstand Replacement: paso 3, imagen 1 de 2 Microsoft Surface Pro 5 Kickstand Replacement: paso 3, imagen 2 de 2
    • Lower the kickstand to about a 15-30º angle from the device.

    • Gently pull the kickstand away from the device, rocking left to right to disengage the adhesive tabs connecting the kickstand to the device.

    • During reassembly, be sure to reinsert the two adhesive tabs into the slots on the back of the device before installing the screws in the hinges.

Conclusión

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Una persona más ha completado esta guía.

Sarah Westberg

Miembro Desde 03/11/19

22,723 Reputación

70 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

136 Miembros

16,573 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 54

Todo El Tiempo: 6,315