Introducción
This video demonstrates how to replace the feet, C-Cover (or keyboard cover), SSD, thermal module (or heatsink), AB-Cover (or display), Surflink port, and battery in your Microsoft Surface Laptop Go 2.
If you're replacing a battery, refer to the Microsoft Surface Diagnostic Toolkit to test your laptop before reinstalling the C-Cover.
Please refer to the official Microsoft Service Guide for step-by-step instructions.
Chapters
00:00 Introduction and Prerequisite Steps
Disassembly
00:50 Non-Skid Feet
01:27 C-Cover
03:22 rSSD
03:49 Thermal Module and AB-Cover
05:03 Surflink
05:54 Battery
Reassembly
06:08 Battery
06:21 Surflink
06:37 AB-Cover
07:14 Thermal Module
07:31 rSSD
07:47 C-Cover
09:07 Non-Skid Feet
Qué necesitas
Instrucciones de Vídeo
After reassembly, use the Surface Diagnostic Toolkit to test that your laptop works as expected.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
After reassembly, use the Surface Diagnostic Toolkit to test that your laptop works as expected.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
0 comentarios