Saltar al contenido principal

Partes

  1. Este paso está sin traducir. Ayuda a traducirlo

    Before you begin, flip the keyboard's power switch into the OFF position.
    • Before you begin, flip the keyboard's power switch into the OFF position.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Flip the entire keyboard over, keys facing down. Flip the entire keyboard over, keys facing down.
    • Flip the entire keyboard over, keys facing down.

  3. Este paso está sin traducir. Ayuda a traducirlo

    The ML2032 rechargeable coin cell battery is located in a tray at the back edge of the keyboard. Insert the flat end of a spudger into the gap between the battery tray and the top surface of the keyboard. Pivot the spudger down, towards the top of the keyboard, to begin to pry the tray out of its cavity.
    • The ML2032 rechargeable coin cell battery is located in a tray at the back edge of the keyboard.

    • Insert the flat end of a spudger into the gap between the battery tray and the top surface of the keyboard.

    • Pivot the spudger down, towards the top of the keyboard, to begin to pry the tray out of its cavity.

  4. Este paso está sin traducir. Ayuda a traducirlo

    Use the flat end of the spudger to push the battery tray out and away from the keyboard. The tray is held in by small "ears" and may take a significant amount of force to dislodge. Remove the battery tray.
    • Use the flat end of the spudger to push the battery tray out and away from the keyboard.

    • The tray is held in by small "ears" and may take a significant amount of force to dislodge.

    • Remove the battery tray.

    • During reassembly, firmly push the battery tray into its slot until it clicks into place.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Push the battery out of the tray to remove it. Note the battery orientation—it can only go in one way. Set the battery into the tray with side with the text and the "+" sign facing down. Use only a rechargeable ML2032 coin cell battery as a replacement. Although it's the same size and shape as the more common CR2032, CR2032s are not rechargeable.
    • Push the battery out of the tray to remove it.

    • Note the battery orientation—it can only go in one way. Set the battery into the tray with side with the text and the "+" sign facing down.

    • Use only a rechargeable ML2032 coin cell battery as a replacement. Although it's the same size and shape as the more common CR2032, CR2032s are not rechargeable.

Linea de Meta

192 personas más completaron esta guía.

Carsten Frauenheim

Miembro Desde 10/03/20

53,960 Reputación

293 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

137 Miembros

16,765 Guías creadas

89 comentarios

Thank you. Worked perfectly. Gained trust in this site. Lost respect for Logitech.

henry - Contestar

My sentiments, exactly!

Melinda Mcvay -

There a better way to open it

put the knife or better a screwdriver on the other side (keys upside); worked for me without damage the keyboard :D

yannick NR - Contestar

Thank You! That did work much better!

Matt Anderson -

Here is an even better method.

You can also totally prevent damage by finding a laminated biz card and cutting it into 2 one inch strips and inserting both of them into the slot on the top side (solar side) of the battery compartment.

Then get your tool ( I like small pointed scissors) and pry it out between the cards.

Very easy!

David Powers -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 50

Ultimos 7 días: 186

Ultimos 30 días: 942

Todo El Tiempo: 200,844