Saltar al contenido principal

Introducción

This guide will show you how to remove the cover. This is a prerequisite guide for all other replacement guides on this page. It is also useful if you need to clean out dust that may be causing overheating.

Partes

No se especificaron partes.

  1. Remove the eight 6 mm screws using a Phillips #0 screwdriver.
    • Remove the eight 6 mm screws using a Phillips #0 screwdriver.

    • Remove the two 11 mm screws using a Phillips #0 screwdriver.

  2. Baterías para portátiles

    Baterías para las marcas de PC más top, respaldadas por nuestra Garantía de Calidad.

    Comprar Ahora

    Baterías para portátiles

    Baterías para las marcas de PC más top, respaldadas por nuestra Garantía de Calidad.

    Comprar Ahora
  3. Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body. Follow along the back edge with the plastic opening tool, lifting the cover off. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.
    • Pry the back cover off by inserting the plastic opening tool at the hinges and wedging it between the Back cover and the body.

    • Follow along the back edge with the plastic opening tool, lifting the cover off. It is normal to hear snapping/clicking sounds as the back cover is held on by clips.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Equipo

USF Tampa, Team S1-G6, Thompson Fall 2017 Miembro de USF Tampa, Team S1-G6, Thompson Fall 2017

USFT-THOMPSON-F17S1G6

3 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 41

Últimos 7 Días: 91

Últimos 30 Días: 408

Todo El Tiempo: 3,477