Repara tus cosas Comunidad Tienda

Jura Impressa C E F models grindstone replacement

Introducción

Basic guide. These instructions are part of another set of instructions and are not intended to be used independently.

Intermediate step for C E F models.

  1. Jura Impressa C E F models grindstone replacement, Jura Impressa C E F models grindstone replacement: paso 1, imagen 1 de 1

    • The instructions apply to almost all devices from Jura and similar devices from AEG, Krups. The success of the repair is striking!

    • The picture shows the old grind stones on the left and the new ones on the right. They consist of a grinding ring and a grinding cone.

    • For this repair, the side parts do not necessarily have to be removed.

    Traducir

  3. Jura Impressa C E F models grindstone replacement: paso 2, imagen 1 de 2 Jura Impressa C E F models grindstone replacement: paso 2, imagen 2 de 2

    • Pull the grinder adjuster up. Note the setting, it is best to take a photo of it.

    • The screws that hold the coffee container are located in two recesses. First clean, then loosen. The protective cover over the grinder does not need to be removed.

    Traducir
Conclusión

Follow the steps in reverse order to reassemble your device

Un agradecimiento especial a estos traductores:

de en

100%

oldturkey03

¡ oldturkey03 nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Autor

con 1 otro colaborador

VauWeh

Miembro Desde 10/19/15

202,869 Reputación

246 Guías creadas

Insignias: 44

+ 41 más insignias

Equipo

Repair is War on Entropy Miembro de Repair is War on Entropy

Community

25 Miembros

1,111 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 7

Todo El Tiempo: 279