Repara tus cosas Comunidad Tienda

Jura Capresso IMPRESSA J5 opening procedure

Introducción

Follow this guide to open the casing of a Jura J5.

Qué necesitas

  1. Jura Capresso IMPRESSA J5 opening procedure, Jura Capresso IMPRESSA J5 opening procedure: paso 1, imagen 1 de 1

    • Unplug the power cord!

    • Remove the water tank and the drip tray. Remove all coffee beans from the storage container.

    Traducir

  2. Jura Capresso IMPRESSA J5 opening procedure: paso 2, imagen 1 de 3 Jura Capresso IMPRESSA J5 opening procedure: paso 2, imagen 2 de 3 Jura Capresso IMPRESSA J5 opening procedure: paso 2, imagen 3 de 3

    • Flip open the lid of the bean compartment.

    • Unscrew the two slotted screws inside the bean compartment. The screws have a rubber washer and will not come out completely.

    • Remove the bean compartment.

    Traducir

  3. Jura Capresso IMPRESSA J5 opening procedure: paso 3, imagen 1 de 3 Jura Capresso IMPRESSA J5 opening procedure: paso 3, imagen 2 de 3 Jura Capresso IMPRESSA J5 opening procedure: paso 3, imagen 3 de 3
    Herramienta utilizada en este paso:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Comprar

    • The top cover is fastened with oval head screws. Unscrew them.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Jura wants to keep us out of our own machines!!!

    Traducir

  4. Jura Capresso IMPRESSA J5 opening procedure: paso 4, imagen 1 de 1

    • Also remove the two oval head screws underneath the ground coffee compartment lid.

    Traducir

  6. Jura Capresso IMPRESSA J5 opening procedure: paso 5, imagen 1 de 1

    • Now you can pry up the top cover all around.

    • Remove the top cover. This often requires a little force.

    • Use plastic tools to avoid scratching your device.

    Traducir

  7. Jura Capresso IMPRESSA J5 opening procedure: paso 6, imagen 1 de 2 Jura Capresso IMPRESSA J5 opening procedure: paso 6, imagen 2 de 2

    • Turn the device with the back facing you.

    • Turn the Jura label a few degrees counterclockwise. If it's hard to do, use a small suction cup.

    • Remove the Jura label.

    Traducir

  8. Jura Capresso IMPRESSA J5 opening procedure: paso 7, imagen 1 de 3 Jura Capresso IMPRESSA J5 opening procedure: paso 7, imagen 2 de 3 Jura Capresso IMPRESSA J5 opening procedure: paso 7, imagen 3 de 3

    • Underneath the label you will find two Torx T15 screws. Remove them.

    • Carefully pull the top of the chrome cover slightly outwards, then push it down and put it aside.

    Traducir

  9. Jura Capresso IMPRESSA J5 opening procedure: paso 8, imagen 1 de 1

    • Remove the Torx T15 screw on the side panel with the water tank.

    Traducir

  10. Jura Capresso IMPRESSA J5 opening procedure: paso 9, imagen 1 de 2 Jura Capresso IMPRESSA J5 opening procedure: paso 9, imagen 2 de 2

    • Pull the right side panel slightly towards the back.

    • Remove the side panel.

    Traducir

  11. Jura Capresso IMPRESSA J5 opening procedure: paso 10, imagen 1 de 1

    • Pull the left side panel slightly towards the back and remove it.

    Traducir
Conclusión

Follow the steps in reverse order to reassemble your device.

2 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

de en

100%

jana°

Annika Faelker

VauWeh

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Autor

con 1 otro colaborador

VauWeh

Miembro Desde 10/19/15

203,187 Reputación

246 Guías creadas

Insignias: 44

+ 41 más insignias

Equipo

Repair is War on Entropy Miembro de Repair is War on Entropy

Community

25 Miembros

1,120 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 11

Ultimos 30 días: 37

Todo El Tiempo: 4,361