Saltar al contenido principal

Introducción

The video below details how to wirelessly transfer data from your previous 2DS/3DS systems to the New 3DS XL. If you'd prefer to do a physical transfer, our guide will show you how to manually transfer the data off of your old 2DS/3DS SD card onto the microSD card of the New 3DS XL.

Partes

No se especificaron partes.

Resumen del Video

  1. Start by removing the stylus from the frame of the New 3DS XL.
    • Start by removing the stylus from the frame of the New 3DS XL.

  2. Loosen the two captive Phillips #1 screws on the back of the device. These captive screws will conveniently stay in the rear cover, so don't try to remove them. Prying from the thumb slots on each side, pull the rear panel off the back of the device.
    • Loosen the two captive Phillips #1 screws on the back of the device.

    • These captive screws will conveniently stay in the rear cover, so don't try to remove them.

    • Prying from the thumb slots on each side, pull the rear panel off the back of the device.

  3. Press the microSD card slightly deeper into its slot until you hear a click.
    • Press the microSD card slightly deeper into its slot until you hear a click.

    • After the click, release the card and it will pop out of its slot.

    • Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.

    • You may need a micro SD to SD adapter.

    • For reassembly, push the microSD card into the slot until it clicks in place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Geoff Wacker

Miembro Desde 30/09/13

85,242 Reputación

89 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 35

Todo El Tiempo: 3,711