Saltar al contenido principal
Inglés
Español
Paso 2
Loosen the two captive Phillips #1 screws on the back of the device. These captive screws will conveniently stay in the rear cover, so don't try to remove them. Prying from the thumb slots on each side, pull the rear panel off the back of the device.
  • Loosen the two captive Phillips #1 screws on the back of the device.

  • These captive screws will conveniently stay in the rear cover, so don't try to remove them.

  • Prying from the thumb slots on each side, pull the rear panel off the back of the device.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.