Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
The spark plugs are easy to spot on the left side of the motorcycle.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the spark plug wire. Do not pull on just the wire, squeeze the spark plug boot, and pull it together with the wire.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use an 11/16" spark plug socket to unscrew the spark plug by turning in a counter-clockwise direction.
-
Remove the spark plug from the cylinder.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Always inspect your new spark plugs before installing. Check the gap on your replacement spark plugs with a feeler gauge. It should be set to .040 inches (1.016mm).
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using your fingers, install the new spark plug into the socket, and hand tighten until firm.
-
Using a torque wrench, tighten the spark plug to the proper specification.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Reinstall your spark plug wire by pushing it firmly onto the new plug.
-
Cancelar: No complete esta guía.
20 personas más completaron esta guía.
8 comentarios
Couldn't have made it any simpler
-awesome
- appreciated
Thank you so much for your posting. I'm 2k miles from my daughter who is teaching herself how to maintain her own bike. You site is immensely helpful and appreciated as much.
Says between 11 and 18 pounds in manuel