Saltar al contenido principal

HP Spectre x360 15" (15t-ap000) Back Cover Replacement

Qué necesitas

  1. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Unscrew the back cover: paso 1, imagen 1 de 1
    • Be sure to completely power off and unplug your laptop before you begin your repair. Make sure the laptop is not in standby, sleep, or hibernation mode.

    • Use a T5 driver to remove the following screws securing the back cover:

    • Six 4 mm-long screws

    • Two 7.8 mm-long screws

  2. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Loosen the back cover: paso 2, imagen 1 de 2 HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Loosen the back cover: paso 2, imagen 2 de 2
    • Use an opening tool or your fingers to pry up the back cover from the laptop.

    • Plastic clips hold the back cover lightly in place, so you may encounter some resistance.

    • If it feels like there is strong resistance, you may have a model that includes screws under the corner feet. Carefully pry the feet up to make sure they don't have screws.

  3. HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Remove the back cover: paso 3, imagen 1 de 2 HP Spectre x360 15" (15t-ap000) Back Cover Replacement, Remove the back cover: paso 3, imagen 2 de 2
    • Lift and remove the back cover.

    • During reassembly, gently press along the perimeter of the back cover to re-engage the clips.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Una persona más ha completado esta guía.

Arthur Shi

Miembro Desde 01/03/18

253,169 Reputación

526 Guías creadas

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

17,125 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 50

Todo El Tiempo: 2,336