Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
Replace the battery housing when the device will not power on but the battery has been verified to work.
Qué necesitas
-
-
-
Using a #00 phillips head screwdriver, remove the two 3.0mm screws
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
5 personas más completaron esta guía.
2 comentarios
Hi, I have a big problem, I don’t get the ribbon from Step 4 back on, do you got any advice? I’m running out of ideas how to get that in…
one crucial thing in step 2, upperleft (red) screw must be switched with botom left (orange) one. I have punctured my gopro housing with screwing an 8.2 mm screw on the bottom left hole... Besides that. very helpfull guide!