Use a plastic spudger tool to remove the plastic frame.
  • Use a plastic spudger tool to remove the plastic frame.

  • Insert the tool into the groove in the center of the top of the outer frame and lever it gently until it pops out.

Agregar Comentario

Use a phillips head screw driver to remove all four screws in the corners around the screen.
  • Use a phillips head screw driver to remove all four screws in the corners around the screen.

  • Set the screws aside for later.

Agregar Comentario

  • Gently pull from both ends to separate the front panel from the back.

  • Do not force the pieces apart wider than the length of the connecting wires or you will damage the wiring.

Agregar Comentario

  • Locate the white wire clip. Gently unplug it using either your fingers or tweezers.

Agregar Comentario

  • Carefully expose both halves of the device.

  • Be sure to not pull the two halves apart too hard to avoid damaging the black wire.

Agregar Comentario

  • Locate the battery bracket and two screws.

  • Remove both screws.

Agregar Comentario

  • Carefully peel the metal bracket away from battery.

  • Pull the battery away from back cover.

  • You may need to use a soldering iron and tongs to remove battery from the speakers.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Adrian Leon

Miembro Desde 07/10/10

169 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 22-1, Maness Fall 2010 Miembro de Cal Poly, Team 22-1, Maness Fall 2010

CPSU-MANESS-F10S22G1

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 7

Todo El Tiempo: 4,065