Repara tus cosas Comunidad Tienda

Canon PowerShot G12 LCD Screen Replacement

Introducción

Replacing the LCD screen is a highly-invasive, step-intensive process that becomes necessary if the screen has sustained damage to due a crack, water, or an otherwise internal malfunction.

In this guide, you will learn how to replace the LCD screen carefully.

Qué necesitas

  1. Canon PowerShot G12 LCD Screen Replacement, LCD Screen: paso 1, imagen 1 de 1

    • Open the LCD screen from its locked position so the screen is visible.

    Traducir

  2. Canon PowerShot G12 LCD Screen Replacement: paso 2, imagen 1 de 1

    • Flip the LCD screen perpendicular to the camera exposing the side screws.

    • Using a Phillips-head 00 screwdriver, unscrew the screws on both sides of the LCD screen.

    Traducir

  3. Canon PowerShot G12 LCD Screen Replacement: paso 3, imagen 1 de 1

    • Remove the front plate which states the Canon brand by prying open the side farthest from the camera simply with your fingers.

    • The circuit and internal wires will be exposed.

    Traducir

  5. Canon PowerShot G12 LCD Screen Replacement: paso 4, imagen 1 de 1

    • Flip the LCD screen vertically and remove the final screws on the outer edge of the screen with the same Phillips-head 00 screwdriver. All screws have Loctite (blue) on them so they a difficult to turn. Make sure your Phillips screw driver fits perfectly. Sometimes a new screwdriver will need to have the tip filed down a little to fit.

    • The internal mechanisms will become loose and be able to be taken out.

    Traducir

  6. Canon PowerShot G12 LCD Screen Replacement: paso 5, imagen 1 de 1

    • Using a spudger, remove the external shell of the LCD screen leaving only the metal internal circuit board and screen attached.

    Traducir

  7. Canon PowerShot G12 LCD Screen Replacement: paso 6, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Using a pair of precision tweezers, carefully remove the yellow circuit connector from the port on the green circuit board.

    • Pull the yellow circuit connector down removing the screen from the metal shell.

    Traducir

  8. Canon PowerShot G12 LCD Screen Replacement: paso 7, imagen 1 de 1

    • Place the new LCD screen into the metal shell with the yellow connector tab facing outward.

    • Connect the new screen with the green circuit board ensuring you use the tweezers to connect it fully into the port.

    Traducir

    Many steps were left out here in this tutorial, especially removing the broken LCD display from its metal case. Try YouTube German video at https://www.youtube.com/watch?v=ZNx2ylpj... from http://www.kamera-station.de. This video shows the complete disassembly and reassembly process, although it's in German. You can at least see the process by pausing and replaying the video. I could not find an English video. Richard Taylor, Elizabeth City, NC, 10/22/2016.

    Richard Taylor - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Nathan Meuwissen

Miembro Desde 02/23/15

550 Reputación

3 Guías creadas

Insignias: 16

+ 13 más insignias

Equipo

USF Tampa, Team 1-5, Leahy Winter 2015 Miembro de USF Tampa, Team 1-5, Leahy Winter 2015

USFT-LEAHY-W15S1G5

Miembros de 3

6 Guías creadas

2 comentarios

ATTENTION

Connector of cable between camera and lcd board can be fit up or down side

Mark it before disconnect

Dufour - Contestar

Hello!

I wanted to change the screen but it seems that camera screen differ from each other according to the country where you bought it has anyone any piece of advice ?

I bought it in Singapore but live in Europe and I’m afraid to waist money buying a European one!

Chloe a - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 16

Ultimos 30 días: 71

Todo El Tiempo: 8,371