Saltar al contenido principal

Introducción

The controller's joystick is connected to a sensor via sliding plates, which then move two knobs(one per axis), which are placed inside two pots whose movement the sensors detects. The knobs can occasionally get dislodged out of the pots, causing a "stuck" and undetected joystick.

Partes

No se especificaron partes.

  1. Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws. Carefully slide and pull the two parts of the controller shell apart, exposing the innards. Carefully slide and pull the two parts of the controller shell apart, exposing the innards.
    • Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws.

    • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

  2. Find the knobs (closest to the joystick and circled in red).
    • Find the knobs (closest to the joystick and circled in red).

    • Locate the pots (closest to the circuitry and circled in orange). Keep track of these.

    • Align the joystick's metal bar into its cup.

    • Don't move any of the button circuitry, especially those of the START/PAUSE/RESET buttons.

  3. Use a spudger to remove the top frame.
    • Use a spudger to remove the top frame.

    • Take off the plate.

    • Remove the rubber buttons.

  4. Realign the top and bottom of the controller. Pull the circuit strip through the new space.
    • Realign the top and bottom of the controller.

    • Pull the circuit strip through the new space.

  5. Return the start buttons to the top of the controller Snap the frame back into place Screw in the three screws on the back.
    • Return the start buttons to the top of the controller

    • Snap the frame back into place

    • Screw in the three screws on the back.

Linea de Meta

4 personas más completaron esta guía.

Alan Abelson

Miembro Desde 26/09/14

233 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 13-1, Staggers Fall 2014 Miembro de USF Tampa, Team 13-1, Staggers Fall 2014

USFT-STAGGERS-F14S13G1

5 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 2,079