Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws. Carefully slide and pull the two parts of the controller shell apart, exposing the innards. Carefully slide and pull the two parts of the controller shell apart, exposing the innards.
Opening the Controller
  • Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws.

  • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.