Saltar al contenido principal

Introducción

If your battery will not charge fully, drains quickly, or shows inconsistent battery percentage this would be a good replacement. Prior to starting this guide, disconnect the power supply from the laptop.

  1. Remove the nine 4mm screws with a PH0 screwdriver. Remove the two 6mm screws with a PH0 screwdriver.
    • Remove the nine 4mm screws with a PH0 screwdriver.

    • Remove the two 6mm screws with a PH0 screwdriver.

  2. Remove the black rubber tab on the back of the computer Remove the 4mm screw hidden underneath the black tab with a PH0 screwdriver.
    • Remove the black rubber tab on the back of the computer

    • Remove the 4mm screw hidden underneath the black tab with a PH0 screwdriver.

  3. Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora

    Kits de reparación de iPhone X

    ¿Garantía vencida? No te preocupes, tenemos la solución.

    Comprar Ahora
  4. Orient the computer upside down, with the hinges facing away from you. Find the black plastic piece in the SD card slot on the right side of the computer.
    • Orient the computer upside down, with the hinges facing away from you.

    • Find the black plastic piece in the SD card slot on the right side of the computer.

    • Remove the plastic piece by sliding it out of the SD card slot.

  5. Insert a spudger at these eight locations to disengage the plastic tabs from the housing cover, and pry apart. Continue around the entire perimeter of the cover with the spudger. Use a spudger to pry the cover around I/O ports.
    • Insert a spudger at these eight locations to disengage the plastic tabs from the housing cover, and pry apart.

    • Continue around the entire perimeter of the cover with the spudger.

    • Use a spudger to pry the cover around I/O ports.

  6. Remove the two 4mm screws using a PH0 screwdriver. Depress the tabs holding the battery with a spudger. Disconnect the battery connector from the motherboard using a spudger.
    • Remove the two 4mm screws using a PH0 screwdriver.

    • Depress the tabs holding the battery with a spudger.

    • Disconnect the battery connector from the motherboard using a spudger.

    • Pull the battery up and away from the laptop to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Nat McCormick

Miembro Desde 15/02/18

657 Reputación

5 Guías creadas

Equipo

USF Tampa, Team S16-G1, Boczar Spring 2018 Miembro de USF Tampa, Team S16-G1, Boczar Spring 2018

USFT-BOCZAR-S18S16G1

5 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 11

Últimos 7 Días: 18

Últimos 30 Días: 55

Todo El Tiempo: 463