Camera Bracket Replacement
2 páginas · 49.20 KB · PDF
Roku Indoor Camera 360 SE (CP1000X) - Camera Mounting Bracket Replacement
Introduction
This guide covers removing the plastic mounting bracket that holds the camera assembly to the base. This must be done before the camera board can be removed.
Prerequisites
-
Complete the Back Panel Replacement guide first.
-
Complete the Camera (Tilt) Motor Replacement guide first.
What you need
Small Phillips screwdriver
Step 1 - Remove the bracket screws
The plastic camera mounting bracket is secured with 2 screws. Remove both screws.
Regístrate gratis en iFixit para leer el documento completo (2 páginas)
Necesitamos que te hagas una cuenta gratuita para ayudar a bloquear los bots y que iFixit siga siendo un sitio para personas.
