logitech

FLIGHT RUDDER PEDALS Professional Rudder Pedals with Toe Brake Simulation Controller

USER GUIDE

FLIGHT

YOKE SYSTEM

RUDDER PEDALS

L

INSTRUMENT PANEL

you

MULTI PANEL

FO

RADIO PANEL

2023

1234567890

SWITCH PANEL

2023

Build your whole cockpit with our modular, interchangable system.

4 ENGLISH 46 MAGYAR
7 DEUTSCH 49 CESKÁ VERZE
10 FRANÇAIS 52 SLOVENČINA
13 ITALIANO 55 YKPAÍHCbKA
16 ESPAÑOL 58 EESTI
19 PORTUGUÊS 61 LATVISKI
22 NEDERLANDS 64 LIETUVIĄ
25 SVENSKA 67 БЪЛГАРСКИ
28 DANSK 70 HRVATSKI
31 NORSK 73 SRPSKI
34 SUOMI 76 SLOVENŠČINA
37 ΕΛΛΗΝΙΚΑ 79 ROMÂNÃ
40 ΠΟ-PYCCKИ 82 TÜRKÇE
43 PO POLSKU 85

GETTING STARTED

ADJUSTABLE PEDALS 3-stage pedal length adjustment ADJUSTABLE TENSION Adjust the resistance to suit any plane

INTRODUCTION

Logitech G Flight Rudder Pedals are solid 3-axis rudder pedals designed to maximize realism by enabling foot control of the rudder and brakes function in flight simulation PC Games. The Rudder Pedals work with any Logitech G Flight products.

THE USB CABLE

Insert the Logitech G Flight Rudder Pedals USB plug into one of your PC's free USB sockets.

INSTALLATION FOR WINDOWS $ ^{\circledR} $ 10, WINDOWS $ ^{\circledR} $ 8.1 AND WINDOWS $ ^{\circledR} $ 7

DRIVER INSTALLATION

1 Visit logitech.com/support/rudder-pedals to download the latest drivers and software for your operating system.

2 With device disconnected, follow the onscreen instructions to complete the installation.

3 At the Driver Setup screen, only when prompted, insert USB cable into one of your computer's USB ports, then click Next.

4 At the Driver Setup screen, click Next to test your controller.

5 When the Logitech Controller screen appears, test the controls to verify device operation. After the test, click OK.

SOFTWARE INSTALLATION

1 In the Software Setup screen, click Next and a pop-up box will ask if you "want to trust software from Logitech." Click yes, then click Next.

2 After installation, you have the option to Run Profile Editor, which will show you the programming environment. To skip the Profile Editor now,