RETURN TO SERVICE PROCEDURE TABLE OF CONTENTS RETURN TO CD-ROM TABLE OF CONTENTS

Service Procedure Field

Date: 28 May 2004 © 2004 Dräger Medical Part Number: SP00321 Rev: -

Innovian International Code Loader Installation Procedure

TABLE OF CONTENTS

Table Caption: This is a table of contents, listing sections and their corresponding page numbers, likely from a technical document or guide, with some inconsistencies in formatting across columns.

SP00321 Rev. -

1 INTRODUCTION

This document describes how to use the Innovian Code Loader application to prepare a coding system for use within Innovian.

2 REQUIREMENTS

Access to the Innovian server. Source files for the coding system to load.

3 SETUP

3.1 Prepare

3.1.1 Terminology Files

A coding system is loaded from one or more text files that either come from the provider or are prepared by Draeger Medical. Appendix A details the coding systems that the loader is able to load in provider format. Appendix B details the generic format required to load other coding systems.

3.1.2 Installation

1. Load the Loader application files into a folder on the server. [e.g. 'D:\Innovian\Code Loader']
2. Ensure that the coding system files are accessible. [e.g. the CD is on-line]
3. • • • IMPORTANT * If the server is listed in the LocalConfiguration table of the Innovian database, then the WorkstationName field for that entry must be set to an invalid value while the Loader is being run, and then restored when finished. One easy way to do this is to edit the row in Enterprise Manager, and put an 'x' in front of the server name [if that's an invalid machine name], and then remove it when finished.

3.2 Configure

Configuration options that appear in the Loader application may be set when the application is run. However, these are not retained and must be re-entered each time. To make the options persistent, edit their values in the following configuration files.

3.2.1 Innovian Database

The Innovian database and server names are specified in the 'Innovian_Code_Loader.exe.config' file by the tags <configuration>\<Innovian_Code_Loader>\<InnovianDB add key="Catalog"> and <configuration>\<Innovian_Code_Loader>\<InnovianDB add key="ServerName">.

Enter the name of the each as the 'value=' property.

SP00321 Rev. -

Example:

  . . .    . . .   . . .     

Note that these must be set when the Loader is run. The database name must be set here, and the server name may be set either here or on the screen.

3.2.2 Terminology

The terminology options are specified in the 'Innovian_Code_Importer_<terminology>_config.xml' file. [e.g. 'Innovian_Code_Importer_ICD9CM_config.xml']

Source path: The key for the source path is <configuration>\<System>\<Path>\<From>. This is the path to the terminology files. [e.g. 'E:\', the CD or DVD drive]

Target path: The key for the target path is <configuration>\<System>\<Path>\<To>.

This