E

r lw

e

i n

LITHOSTAR Multiline

' Siemens AG The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. 1998

System

Software

SP

Software generation, Operating PC

03127011

Print No.:

RXL2-120.816.02.01.02

Replaces: RXL2-120.116.03.05.02

English

Doc. Gen. Date: 12.05

1Revision / Disclaimer

Document revision level

The document corresponds to the version/revision level effective at the time of system delivery. Revisions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer

The installation and service of equipment described herein is to be performed by qualified personnel who are employed by Siemens or one of its affiliates or who are otherwise authorized by Siemens or one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated with or authorized by Siemens or one of its affiliates are directed to contact one of the local offices of Siemens or one of its affiliates before attempting installation or service procedures.

RXL2-120.816.02.01.02

12.05

2Software generation System units, rear view

Fig. 1:

System units, rear view

Item 1:

Keyboard connection

Item 5:

Power connection

Item 2:

Mouse connection

X50:

Respiratory ECG signal connection

Item 3:

Power connection

X51:

DUEP connection

Item 4:

Monitor connection

0

Workflow

0

NOTE

During the software installation, German text appears. The reason for this is the German-language operating system.

• Switch the system OFF .
• Disconnect the DUEP connection X51 at the rear of the system unit (PC).
• Open system unit (PC).
• Open the cover panel in front of the drive.

Change the keyboard

(from English to French or vice versa)

⇒ Yes

⇓ No

⇓

⇓

⇐ ⇐ ⇐ ⇐ ⇐ ⇐ ⇐ ⇐

⇐

⇐ ⇐ ⇐ ⇐ ⇐

⇐

Swap keyboard

(just disconnect the cable from the old keyboard and plug it into the new one)

⇓

Select a PC

(Activate the floppy on the PCD-4Lsx / p. 5)

(Activate the floppy on the PCD-5L / p. 6)

(Activate the floppy on the SCENIC Pro C5/C6 / p. 7)

(Activate the floppy on the LM - Control Unit / p. 8)

(Deactivate the floppy on the PCD-4Lsx / p. 11)

(Deactivate the floppy on the PCD-5L / p. 12)

(Deactivate the floppy on the SCENIC Pro C5/C6 / p. 13)

(Deactivate the floppy on the LM - Control Unit / p. 14)

Activate the floppy on the PCD-4Lsx

• Switch the system ON .
• During the display, press the "Ctrl", "Alt" und "INS" (or "Inser") keys.
• Enter the password "TDRX".
• Press the "ENTER" or "EntrØe" key. The CMOS Setup Menu appears.
• Press the following key once:
• "Page Up" or ' ↑ " on the English or the French keyboard, as the case may be.
• With the " ↓ " or " ↑ " cursor key select 'Diskette Ctrlr".
• With the"+" key on the number pad, select "ENABLED".