INTERIOR TRIM
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
| Specification | ||
|---|---|---|
| Application | Metric | English |
| Sunshade Bolt | 2 N.m | 18 lb in |
| Rear Side Door Armrest Bracket Bolt | 10 N.m | 89 lb in |
| C Pillar Assist Handle Bolt | 52 N.m | 38 lb ft |
| Assist Handle Bolt | 9 N.m | 80 lb in |
| Rear Seat Cup Holder Screw | 2 N.m | 18 lb in |
| Upper Body Side Garnish Screw | 2 N.m | 18 lb in |
| Windshield Side Garnish Screw | 9 N.m | 80 lb in |
| Door Trim Panel Screw | 2 N.m | 18 lb in |
| Door Trim Panel Bolt | 9 N.m | 80 lb in |
| Sunshade Screw | 2 N.m | 18 lb in |
Table Caption: This table provides torque specifications in both metric (Newton-meters) and English (pound-inches or pound-feet) units for various automotive fasteners. It lists the application of each fastener, such as bolts and screws for components like sunshades, armrests, and trim panels.
REPAIR INSTRUCTIONS
DOOR INSIDE HANDLE BEZEL REPLACEMENT
2007 Hummer H3 2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT
Interior Trim and Paneling - H3
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
Courtesy of GENERAL MOTORS CORP.
Door Inside Handle Bezel Replacement
| Callout | Component Name |
|---|---|
| 1 | Front Side Door Armrest Finish Cover |
Table Caption: This table lists component names associated with numerical callout numbers, with the first entry identifying callout 1 as the "Front Side Door Armrest Finish Cover."
FRONT SIDE DOOR TRIM PANEL REPLACEMENT
Courtesy of GENERAL MOTORS CORP.
Front Side Door Trim Panel Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure | |
| 1. | Remove inside handle bezel. Refer to Door Inside Handle Bezel Replacement . |
| 2. | Remove the door window switches. Refer to Door Lock and Side Window Switch Replacement - Driver Side (1st Design) or Door Lock and Side Window Switch Replacement - Driver Side (2nd Design) or Door Lock and Side Window Switch Replacement - Passenger Side . |
Table Caption: This table outlines the preliminary steps required before a more complex procedure, listing specific components to be removed and referencing their respective replacement guides.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
| 1 | Trim Bolt Accessory Hole Cover |
|---|---|
| 2 | Door Trim Panel Screw Tighten: 2 N.m(18 lb in) NOTE: Refer to Fastener Notice . |
| 3 | Door Trim Panel Bolt (Qty: 2) Tighten: 9 N.m(80 lb in) |
| 4 | Side Door Trim Panel Assembly Tip: 1. Release the inside door handle cables. Refer to Front Side Door Inside Handle Replacement . 2. Disconnect the electrical connectors. |
| 5 | Side Door Trim Panel Retainer (Qty: 9) |
Table Caption: This table lists parts and procedures for removing and installing a side door trim panel, including specific fasteners, torque values, and a tip for releasing cables and connectors.
REAR SIDE DOOR TRIM PANEL REPLACEMENT
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
Rear Side Door Trim Panel Replacement
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure 1. Remove inside handle bezel. Refer to Door Inside Handle Bezel Replacement . NOTE: Refer to Fastener Notice . | |
| 1 | Cover, Trim Bolt Accessory Hole |
| 2 |
Table Caption: This table lists specific callouts and their corresponding component names, likely from a technical manual or diagram, with some callouts not having a specified component.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
| Tighten: 2 N.m(18 lb in) | |
|---|---|
| 3 | Bolt, Door Trim Panel (Qty: 2) Tighten: 9 N.m(80 lb in) |
| 4 | Panel Assembly, Side Door Trim Tip: Release the inside door handle cables. Refer to Front Side Door Inside Handle Replacement . |
| 5 | Retainer, Side Door Trim Panel (Qty: 7) |
Table Caption: This table outlines the tightening specifications for bolts and provides a tip regarding the release of inside door handle cables for the side door trim panel. It also lists the quantity of retainers for the side door trim panel.
FRONT SIDE DOOR WATER DEFLECTOR REPLACEMENT
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
Front Side Door Water Deflector Replacement
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure: Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement . | |
| 1 | Deflector Assembly, Front Side Door Water |
Table Caption: This table provides callouts and corresponding component names, with the first row detailing a preliminary procedure involving fastener tightening specifications and trim panel removal, and the second row identifying the "Deflector Assembly, Front Side Door Water."
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
any wiring or connectors through the water deflector.
REAR SIDE DOOR WATER DEFLECTOR REPLACEMENT
Rear Side Door Water Deflector Replacement
| Callout | Component Name |
|---|---|
| Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure: Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement . | |
| 1 | Deflector Assembly, Rear Side Door Water Tip: Carefully pull the water deflector away from the door while routing any wiring or connectors through the water deflector. |
Table Caption: This table lists callouts, which are references to specific instructions or components, alongside their corresponding component names. The entries detail procedures like fastener tightening and the removal and handling of a rear side door water deflector assembly.
ARMREST BRACKET REPLACEMENT
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Interior Trim and Paneling - H3
Armrest Bracket Replacement
Table Caption: This table lists specifications for reassembling a rear side door armrest bracket, detailing fastener tightening torque and component names. It also includes preliminary removal procedures for related trim panels and water deflectors.
COWL SIDE TRIM PANEL REPLACEMENT
2007 Hummer
Regístrate gratis en iFixit para leer el documento completo (23 páginas)
Necesitamos que te hagas una cuenta gratuita para ayudar a bloquear los bots y que iFixit siga siendo un sitio para personas.
