Jitterbug Quick-Start Guide

Other charges and restrictions may apply. Coverage and service is not available everywhere. 'LiveNurse, brought to you in partnership with FONEMED® is not a substitute for dia ing 911 and should not be used in a case of emergency. FONEMED's registered nurses offer advice regarding health care decisions, but they do not prescribe medications or make diagnoses. GreatCall is not liable for any act or omission, including negigence, of any FONEMED employee. LiveNurse is free on select plans, but airtime charges do apply for the length of the calls made to the service. The information on Wellness Calls is NOT medical advice. Standard usage rates apply while listening to Wellness Calls on your phone. GreatCall is not a health care provider and does not provide health care services. Medication Reminders and Check-in Calls are not a substitute for professional medical advice, diagnosis, or treatment. You should seek the advice of your physician if you have any questions about medical treatment. Jitterbug and GreatCall are registered trademarks of GreatCall, Inc. Samsung is a registered trademark of Samsung Electronics America, Inc. and its related entities. Copyright ©2010 GreatCall, Inc.

GH68-32504A

The Inside Of Your Jitterbug®

1. Earpiece Speaker
2. Inside Display
3. Up/Down Button
4. Speakerphone Button
5. YES Button
6. Power Connector and Accessory Connector
7. Noise Reduction Technology
8. Power Button
9. NO Button
10. Microphone

How To Read The Inside Display

The screen on the inside of your Jitterbug $ ^{\circledR} $ is referred to as the Inside Display. The following diagram explains the areas of the Inside Display.

1. Feature Area

2. Detail Area

3. Action Line PHONE BOOK John Williams 555-555-1212 CALL?

4. Additional Entries Exist

5. Feature Area – identifies the feature you are using. For example, when you are in the Phone Book, you will see “PHONE BOOK” in the Feature Area.

7 Quick-Start Guide

2. Detail Area – the middle of the Inside Display provides the details of each feature.

3. Action Line -line where questions or commands are displayed. You can respond by pressing the YES or NO buttons.

4. Additional Entries Exist— the small arrows indicate when entries are available before or after the current screen. Use the "Up/Down" button to scroll through entries.

Turning Your Jitterbug On

1. Open your Jitterbug.

2. Press the $ \underline{\text{on/off}} $ button in the upper right corner of the keypad until your Jitterbug turns on and the Jitterbug logo appears on the Inside Display.

3. When you hear a dial tone, your Jitterbug has service and is ready to use. If a connection is not possible, a “No Service” message will appear on the Outside Display and a dial tone will not be heard.

Your Main Screen

For your convenience, each time you turn your Jitterbug $ ^{®} $ on, you will see the Main Screen as shown. The Main Screen displays your phone number at the top of the screen and allows you to access all of the features on your Jitterbug. Your Jitterbug is designed with the following four features installed in your phone:

1. Phone Book – store up to 50 of the names and numbers that you call most often.

2. Call History – an easy way to review your last ten incoming, outgoing and missed calls, listed with the most recent first.

3. Phone Info – gives you your phone number, battery life, signal strength and approximate minutes used per month.

jitterbug

My # 800-733-6632

Voice Dial

Phone Book

Voice Mail

SELECT?

4. Settings – you can change the color of the Inside Display, select Ring Tones, turn the Jitterbug start-up Jingle on/off and change Bluetooth $ ^{®} $ settings.

You can easily access all of your features within the Main Screen using three simple buttons located at the top of the keypad.

1. Use the "Up/Down" ☐ button to scroll through the features of the Main Screen.

2. When the feature you want to select is highlighted in gray in the middle of the Inside Display, press the YES button to select that feature.

3. The ☐ button enables you to answer "No" to questions in the Action Line and return to a previous screen. If you make a mistake while dialing a number or typing a Text Message, you can press the ☐ button to back up and delete what you entered.