M5 Quick Reference Guide
Quick Reference Guide
Getting Started
New Patient
-
Press [Patient], fill in basic patient information.
-
Press [Exam].
-
Move [Trackball] to choose probe and exam mode.
Scanning
B Mode
-
Press [B] to enter B mode.
-
Rotate [Gain & iTouch] knob to adjust gain.
CDFI/Power Mode
-
Press [Color] to enter Color mode.
-
Move [Trackball] to change the position of ROI.
-
Press [Set], and then move [Trackball] to change the size of ROI, press [Set].
PW/CW Mode
-
Move [Trackball] to change the position of sample volume.
-
Use related [Function Key] to change the size and angle of sample volume, press [Update] or [PW] to get the Pulse Wave Doppler.
Image Adjustment
Freq 7.5MHz Beam Off Focus Position Dynamic Range 83 FOV W Tail Off Gray Map Map7 Focus Number 1 9 Stem Traperald Off
The [Soft Key] is corresponding to the soft menu. Use left/right keys to switch the modes, use up/down keys to choose parameters and turn pages up or down.
The parameters in B mode: Frequency, iBeam, Focus Position, iClear, ExFOV, Line Density, Gray Map, Focus Number, Colorize, FOV, iTouch, Persistence, L/R Flip, Colorize Map, Dynamic Range, Acoustic Power, IP, U/D Flip, Magnify, FOV position.
The parameters in Color mode: Scale, Flow State, WF, Invert, Packet Size, Frequency, Priority, Baseline, Line Density,
Regístrate gratis en iFixit para leer el documento completo (2 páginas)
Necesitamos que te hagas una cuenta gratuita para ayudar a bloquear los bots y que iFixit siga siendo un sitio para personas.
