Dell PowerEdge R710 Getting Started Guide

Dell™ PowerEdge™

R710 Systems

Getting Started

With Your System

Začináme se systémem

Guide de mise en route

Erste Schritte mit dem System

Та трюта в @mama me то oštnúš o sa

Rozpoczęcie pracy z systemem

Начало работы с системой

Procedimientos iniciales con el sistema

Sisteminizi Kullanmaya Başlarken

псунбл пп

DELL™

Dell™ PowerEdge™

R710 Systems

Getting Started

With Your System

D\&LL $ ^{™} $

Notes, Cautions, and Warnings

U

NOTE: A NOTE indicates important information that helps you make better use of your computer.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Model E02S

December 2008

P/N CX802 Rev. A02

Installation and Configuration

△！

WARNING: Before performing the following procedure, review the safety instructions that came with the system.

Unpacking the System

Unpack your system and identify each item.

Installing the Rails and System in a Rack

Assemble the rails and install the system in the rack following the safety instructions and the rack installation instructions provided with your system.

Optional – Connecting the Keyboard, Mouse, and Monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.

Connecting the Power Cables

21

Connect the system's power cable(s) to the system and, if a monitor is used, connect the monitor's power cable to the monitor.

Securing the Power Cord

21

Bend the system power cable into a loop as shown in the illustration and secure the cable to the bracket using the provided strap.

Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterruptible power supply (UPS) or a power distribution unit (PDU).

Turning on the System

Press the power button on the system and the monitor. The power indicators should light.

Installing the Optional Bezel

Install the bezel (optional).

Complete the Operating System Setup