Editando Drager MicroVent

Título de página

Título de Pantalla

Resumen

Repair and service information for the Drager MicroVent, a medical ventilator intended primarily for adults and old age people.

Información Adicional

[flag|biomed]

== ***Background and Identification:*** ==

The Drager MicroVent is a time-cycled, volume-constant ventilator for patients with a bodyweight of at least 15 kg (33 lbs) up to 150 kg (330 lbs).

The Drager MicroVent is easily identifiable as it has the name and model designation “Drager MicroVent” printed on the top left and right corner of the face of the device. The MicroVent has multiple switches, pressure gauges and a small display on the front face. The device is a 4-5 feet tall structure with wheels at the bottom, a rectangular controller, with a small arc on the top containing a carrying handle and oxygen pipes. The device is white and has most of its functionality on its thinner faces which include the valves and valve controls for ventilation purposes.

More information for this device can be found on the technical support page on [link|https://www.manualslib.com/manual/1873591/Dr-Ger-Microvent.html#manual|manualslib.com].

== ***Technical Specifications:*** ==

=== ***''Physical Characteristics''*** ===

* Dimensions(W   x H x D) — 215 x 120 x   205 mm (8.5 x 4.7 x 8.1 inches)
* Weight — 4.3 kg (9.5   lbs)
* The noise level during operation — 48 dB(A) in 1   m distance

=== ***''Electrical supply''*** ===

* Electrical   power input into MicroVent  —12 V ±1 V DC
* Connection to   external supplies 12/24/28 V DC — via DC/DC   converter(84 13 017)
* Fuse  — T1L 250V IEC 127-2(behind the lid of the battery compartment)
* Connection to external — via AC adapter (84 12 709)
* AC source — Input:120V/60Hz AC max. 200 mA and Output:12 V DC max. 600 mA
* Current consumption during rapid charge ventilator off  — 300 mA (for 8   hours, after that automatic switch to trickle charge)
* Ventilator on  —390 mA
* During trickle charge  — 30 mA
* Ambient temperature range during the charge of NiCd — 32 to 95 ºF   (0 to 35 ºC)
* Time of operation with internal NiCd or alkaline battery pack — max. 2 hours   at 41 to 122 F (5 to 50 ºC) with typical settings
* Insulation class of power supply — Pursuant IEC 601

=== ***''Construction Materials''*** ===

* Ventilator enclosure — Impact-resistant ABS plastic
* Reusable patient circuit — Silicone Rubber
* Pressure sensing lines for flow measurement — Silicone Rubber
* Flow sensor Housing — Polysulphone (PSU)
* Flow sensor membrane — Stainless Steel
* Ventilator front panel keypad — Polyester Membrane
* Expiration valve housing — Polysulphone (PSU)
* Expiration valve membrane — Silicone Rubber

== ***Model’s Basic Details:*** ==

[image|2354560|align=center]

# The knobs in the center of the front panel set:
** ventilator rate        f
** tidal volume        VT
** inspiratory time    Tinsp.
# Below, grouped in one field, are the knobs for:
** max. airway pressure Pmax
** minute volume alarm limits, MV
# Next to this field, the knob for setting
** pressure support during spontaneous breathing
** endexpiratory pressure, PEEP and positive airway pressure, CPAP
# Next to it, the switch for ventilation modes
** CMV / A/C or SIMV / CPAP
# On/off switch, ON/OFF
# Pressure Gauge for continuous display of airway pressure
# Liquid crystal display for
** measured parameter values (MV, PEEP, Peak, Mean, I: E, Insp. flow)
** Alarms and advisory messages with a key to switch on display backlighting and to display measured parameter values.
# Key to temporarily silence audible alarms and to reset alarm messages after correcting the cause of an alarm.

== ***Additional Information:*** ==

1.  [document|19424|Drager Microvent Troubleshooting Guide]: This guide lists some very important troubleshooting steps which are very helpful in maintaining the device.

2.  [link|https://www.manualslib.com/manual/1873591/Dr-Ger-Microvent.html|The Ultimate Manual Library]: The ultimate manual library provides very detailed and clear instructions on how to operate the device.

3.  [link|https://www.draeger.com/Library/Content/ventilation-mini-handbuch-bk-9069812-en.pdf|Drager Official website]: This product is owned and manufactured by Drägerwerk AG & Company, so this manual is officially published and updated with all the new details.

Documentos Adjuntos

18 Documentos Añadir un Documento

Microvent Gas Tubing Diagram S.pdf

Microvent Repair Procedure.pdf

Microvent Service Mode.pdf

Microvent Spare Parts List.pdf

Microvent Troubleshooting Guid.pdf

Drager MicroVent Conversion Instructions.pdf

Drager MicroVent Conversion and Schematics.pdf

Drager MicroVent Conversion.pdf

Drager MicroVent Service Strategy.pdf

Drager MicroVent Interconnecting Diagram.pdf

Drager MicroVent Conversion Instructions_DE.pdf

Drager MicroVent Test Certificate.pdf

Drager MicroVent Operating Instructions.pdf

Drager MicroVent Schematic Diagram.pdf

Microvent Gas Tubing Diagram SW121.pdf

Drager Microvent Spare Parts List_DE.pdf

Microvent Troubleshooting Guide.pdf

Microvent Operating Manual.pdf