Saltar al contenido principal
« Volver a Todos los Cuentos

Resurrecting a wet iphone...

idlegravity -

iPhone 1st Generation

iPhone 1st Generation Battery Replacement

iPhone 1st Generation Battery Replacement

55 minutos - 1 hora

Very difficult

Mi Problema

Although leaving my iPhone 2g on the lawn to get soaked by the sprinklers was a good excuse to upgrade, I've never had the heart to actually throw the broken thing away. I finally decided I might as well try to crack it open so I ordered tools and a replacement battery.

Mi Solucion

Opening the phone was easier than I expected. All told, I spent about an hour opening the phone, desoldering the old battery, soldering in the new one, and cleaning out some lint with a dental pick and canned air. The phone looks almost as good as new now, although some of the seams aren't quite as tight as they were from factory. Now I want to try repairing all my busted down gadgets.

Mi Consejo

I cut my fingers a few times on the sharp edges of the aluminum iPhone back, so be careful! Also, use some desolder braid to clean up the pads where the battery is soldered in.

Imagen Spudger


Imagen Phillips #00 Screwdriver
Phillips #00 Screwdriver


Imagen Metal Spudger
Metal Spudger


Imagen iSesamo Opening Tool
iSesamo Opening Tool


« Volver a Todos los Cuentos

0 Comentarios

Agregar Comentario