Saltar al contenido principal

Modelo M5884 / Procesador 400 o 500 MHz G4

Preguntas 23 Ver todo

screen stays dark but machine runs

we started up a merury book (400) after several years in cupboard with a pram restart. it starts up completly. now the battery charges and we can start "normally" again with pressing the startbutton, then one can see the applelogo while startup very very dim. screen stas black,

after staring up the fannoise is there, as well as the noise of sound button etc.

just the sceeen stays dark.

any suggestions?

thanks

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

2 Respuestas

Solución Elegida

Could be a connection, the inverter, a cable or backlight - follow this post for troubleshooting & diagnosis. Connect to an external display will rule out video chip/logic board problems.

If this Answer is helpful please remember to return and mark it Accepted.

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Respuesta Más Útil

If you can see the desktop on the machine, you most likely have an inverter or inverter cable problem. To verify this, hook it up to an external monitor and see if you get a picture. Also try moving the screen up and down and see if there are any changes. Let us know your results.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

Añadir tu respuesta

Ren estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 499