Repara tus cosas Comunidad Tienda

Modelo A1419 / EMC 2806 / Finales de 2014 o mediados de 2015. 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 finales de 2015 / 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (iMac17,1) Todo con pantallas Retina 5K

Preguntas 573 Ver todo

Opciones

Can I test the 27” 5k screen on a 21.5 model?

I took the screen off a mid 2015 27” iMac to swap out the HDD for an SSD. Stupidly I didn’t realise it had on board SSD, however when I reassembled, the screen would not fire up, and now the fan comes on full speed. I’ve replaced the wide cable but still no life - I do get 3 LEDs, but not the fourth. I want to find out if the screen is dead or not, can I connect it to a 21.5” iMac logic board to see if it will work?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0

2 comentarios:

How did you take it apart? Did you follow a guide?

- de

I followed a video guide but the monitor leads were

Very difficult to get off the logic board. I’ve done this before with a 21.5” and it went absolutely fine

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

While I am not too sure about the 21.5" and 27" screens being cross-compatible with each other, I do have a feeling that this may not be possible judging by how Apple is.

However, what you could do is connect an external monitor to your iMac, and see if it shows an image instead of just trying to hook up a proprietary display that probably wont work with your model of iMac.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Garfy estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 25