Saltar al contenido principal

La primera generación del Nissan Murano se presentó en forma de producción para el año modelo 2003 en el 2002 New York International Auto Show.

Preguntas 19 Ver todo

Porque no sale agua en las plumillas

Porque no sale agua en el limpia bidrios

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

2 Respuestas

@elberalvernia could be a bad pump, clogged hose or clogged spray nozzles. Disconnect one of those hoses and activate the washer. You should hear/feel the pump on the reservoir working. If water does come out of the disconnected hose, you may need new nozzles.

If not, then check for power on the pump. Use a test light or a voltmeter and test it when your activate the washer pump. If you have power going to the pump then it is the pump that needs to be replaced. Of course, check the fuses in the fusebox. The one for the pump should be a 10A fuses in the fuse box under the hood on the passenger side.

If you need to works on the pump itself, check something like this video It's a tedious job especially since you even have to remove the wheel to even get to it.

While you work on your Nissan, take lots of pictures. Once you are done with it, take those pictures and create a guide for iFixit. That will help the next person that has the same problem as you do. It's easy and fun to create these guides. The iFixit community will appreciate this.

Repair is War on Entropy!

Translation

@elberalvernia podría ser una bomba en mal estado, manguera obstruida o boquillas rociadoras obstruidas. Desconecta una de esas mangueras y activa el lavaparabrisas. Deberías oír/sentir cómo funciona la bomba del depósito. Si sale agua por la manguera desconectada, es posible que necesite boquillas nuevas.

Si no es así, compruebe si hay corriente en la bomba. Utilice una luz de prueba o un voltímetro y pruébelo cuando active la bomba del lavaparabrisas. Si hay corriente en la bomba, entonces es la bomba la que necesita ser reemplazada. Por supuesto, compruebe los fusibles en la caja de fusibles. El de la bomba debe ser un fusible de 10A en la caja de fusibles bajo el capó en el lado del pasajero.

Si necesitas trabajar en la bomba en sí, comprueba algo como este video Es un trabajo tedioso sobre todo porque incluso tienes que quitar la rueda para llegar a ella.

Mientras trabajas en tu Nissan, toma muchas fotos. Una vez que hayas terminado, toma esas fotos y crea una guía para iFixit. Eso ayudará a la próxima persona que tenga el mismo problema que tú. Es fácil y divertido crear estas guías. https://es.ifixit.com/Guide/new La comunidad iFixit te lo agradecerá.

¡Reparar es la guerra contra la entropía!

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

¿Se oye la bomba funcionar? si se oye, los aspersores pueden estar atascados, algunos se pueden desatascar con una aguja fina de costura

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Elber Alvernia estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 14