Saltar al contenido principal

A2116 / 2019 / Procesador quad-core i3 a 3.6 GHz, 6-core i5 a 3.0 GHz, o 6-core i7 a 3.2 GHz. Lanzada el 19 de marzo de 2019.

Preguntas 78 Ver todo

Display is not working after SSD Upgrade

Hello. So I just upgraded my iMac (21.5 4K 2019) with an SSD

How can I tell if either display cables on the iMac LCD is bad? My iMac display won't turn on after doing the SSD upgrade and reconnecting the LCD to the logic board. I'm using an external display and everything is working except for the iMac display. If I go to settings - display the built-in display is recognize. But again nothing shows up in the screen - not even the apple logo when turning it on.

Also the Facetime Camera is working.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Hi @carlossosa72884
I'm not sure of the problem here since you did an upgrade but you probably damaged the display or it's cables while you upgraded the SSD, Since your computer recognizes the built in display the wires should be working so the display may have to get replaced.

Let me know of any developments

Fue útil esta respuesta?

Puntuación 0

2 comentarios:

Hi @ihave0idea.

Thanks for the quick Reply.

So I tried disconnecting the black power cable. Not the eDP cable but the other one, to see if anything change, and I got the same behaviour. No display, Display shows up in Settings and Facetime Camera works.

Also I checked the LED Lights on the Logic board and 4/5 turns on. I believe the 5th light (the one that does not turn on) is the display backlight/power.

iMac won't boot, black screen and no external display

So not sure if that's the damaged cable.

- de

HI @carlossosa72884

Thanks for replying, Like i said before. You may have to replace the LCD panel on the mac

- de

Agregar un comentario

Añadir tu respuesta

Carlos Sosa estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 20