Repara tus cosas Comunidad Tienda

A1706 / EMC 3071: lanzado en noviembre de 2016, este Macbook Pro de 13 "presenta la barra táctil OLED. Cuenta con una CPU Intel Core i5 de doble núcleo" Skylake "y cuatro puertos Thunderbolt 3.

Preguntas 239 Ver todo

Opciones

1RS fell off during battery replacement, fan on constantly

I recently replaced my battery, tested and it’s working fine.

I noticed when I initially removed the lower case a “1RS” was out of place. I’m not sure if this happened when I was removing the case.

  1. what is a 1RS?
  2. Can it be replaced (soldered back into place)
  3. Do I need a new part?

When I turned my MacBook on, the battery was working perfectly, charging etc, however the fan has been on constantly.

I’ve preformed a SMC, PRAM & NVRAM reset and the issue with the fan still exists.

Block Image

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 2
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

@bmcdermott that is reference designator L3500 which is a PIM B062D-SM series 1.5UH 20% 12.5A 0.017OHM inductor. The series is hard to match but the inductor is available at places like this Even so the series is different, it will still fit the solder pads. If unsure of that download the datasheet for the inductor from the site I linked to and it will have the dimension for the solder pads on there. Does not look like it is related to your fan issue at all but it is part of the TBT 5V regulator circuit.

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Añadir tu respuesta

Oonagh estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 18