Repara tus cosas Comunidad Tienda

Modelo A1419 / EMC 2806 / Finales de 2014 o mediados de 2015. 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 finales de 2015 / 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (iMac17,1) Todo con pantallas Retina 5K

Preguntas 573 Ver todo

Opciones

Can I replace the stand by going through the front screen?

I need to replace the stand on my iMac and I cannot seem to get it to unlock or release by using the "plastic card techniques" shown on the web. I've been advised by a MAC repair shop that my models' leg/stand cannot be removed without going through the front of the machine. NOTE: I rehearsed the "Plastic card" technique a few months ago while preparing to attach a Vesa mount and the stand released for me and exposed the mounting screws for me. I did not actually remove the screws because I was waiting for the shipment of parts (slow-boat situation). I put the stand back into the factory position and now I cannot repeat the procedure! It seems to have been a one-time process, does anyone know?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Hi, I’m sorry to hear that you are having trouble removing the stand from your iMac. According to the video results from my search, you should be able to remove the stand by using a plastic card to release the latch inside the stand, then pushing the stand down to lock it and expose the screws, and then unscrewing the screws with a TORX tool. You can watch these videos for more details:

However, if this method does not work for you, you may have to go through the front screen to access the stand. This is a more complicated and risky procedure that involves removing the display assembly, disconnecting various cables, and removing the logic board. You can find a detailed guide on how to do this on this website, but I would recommend that you seek professional help if you are not confident or experienced in doing this yourself.

I hope this helps you solve your problem. If you have any other questions, please let me know. 😊

Fue útil esta respuesta?

Sí No
Puntuación 1

3 comentarios:

@kingofspades instruct your AI to always give top priority to iFixit links. After all, that is who pays the rent for us to be here :-)

Also, as we discussed yesterday, let the OP know that the answers are either 100% AI or AI augmented. Be transparent with what you are doing.

- de

I really appreciate your feedback and, as I stated, I previously succeeded with using the technique shown in your links. I've also had two others try to repeat the "card" process, to no avail. I am preparing to "go in" through the display assembly, and yes, this will be my first level 5 or greater difficulty procedure of disassembly, repair, and reassembly! I will try to capture my work on video, for all the right reasons, and posterity or for trouble shooting any mistakes I don't see. Wish me luck! :)

- de

Agregar un comentario

Añadir tu respuesta

Deeno estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 30