Repara tus cosas Comunidad Tienda

{A1989 / EMC3214}-Lanzado en Julio de 2008, el MacBook Pro de 13 pulgadas cuenta con el procesador Quad-Core i5 e i7 y gráficos integrados Intel Iris Plus.

Preguntas 199 Ver todo

Opciones

MacBook not starting after battery replacement

Replaced the battery on my 2018 Macbook Pro Touchbar, turned it on, and it started, Coconutbattery said it was at 100% battery health with 0 battery cycles. I took out the battery, used the adhesive strips to glue it in, and then put it back together. Now, when I try to start it, it shows no signs of life. I've tried reinstalling the battery several times, as well as starting the Macbook while plugged in. Is there anything else I could do? How else can I troubleshoot this issue? Thanks in advance :)

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Did you forget to fully shut down the system the second time? Refer to Step 1 in this guide Reemplazo de la batería de la MacBook Pro 13" 2018

At this point you need to connect a second Mac via USB-C using Configurator2 App to recover things.

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

Thanks for the response! It looks like I did forget to disable auto boot before doing the repair. Will I be able to get the Macbook working again? If so, how do I go about doing that. Thanks again!

- de

@maximm65709 - You need to leverage a second system to run Confurator2 apps

- de

Agregar un comentario

Añadir tu respuesta

Maxim M estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 41