Saltar al contenido principal

El principal iPhone 2020 de Apple fue lanzado el 23 de octubre y viene con una pantalla de 6.1", sistema de cámara dual de 12 MP, y en cinco colores disponibles. Sucesor del iPhone 11.

Preguntas 165 Ver todo

iPhone 11 12 13 Spot Welding Battery = 0 Volts

I just got in a spot welder to replace a battery on my first Iphone 11 this week.

After spot welding the output voltage was 0.

_________________________

Now I have 2 broken Iphone 12's

Same issue happened, I went to spot weld the Flex onto battery and then 0 Volts on the output...
_________________________

Thanks
Kevin

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
5 comentarios

there is a solder out now that you can use for soldering the bms, maybe you should try that to see if you have better results

- de

@tech_ni Thanks, with a quick search i dont see bms solder. I do have Kester solder though which is premium solder.

Perhaps its just not making a connection. I guess i should try to sand or scuff the surface before attaching. I notice the tabs are laminated and can prevent conductivity..

- de

@tech_ni

@4min. 0 volts is normal... i will have to test this.

https://youtu.be/rdIjopmCmRw

- de

@willie604 looks like the battery just needs activated

- de

Agregar un comentario

2 Respuestas

Solución Elegida

I found the answer here...

After he solders the bms at 4min, the battery voltage reads 0V. He says this is normal.
You need to plug the phone it for it to come to life.

It was fine all along....

https://youtu.be/rdIjopmCmRw

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario
Respuesta Más Útil

Hi

Me personally iv never done the whole spotwelding battery’s thing so apologies if this isn’t any help

What I do is solder onto the terminals as I would imagine it isn’t as aggressive to the BMS or the battery

Not much solder is needed just enough to make it strong but still low profile

Hopefully this helps

Any questions please ask

Thanks:-)

Fue útil esta respuesta?

Puntuación 1

4 comentarios:

Hello,

I found something interesting in this video. He shows 0v is normal after attaching a bms

Also i didnt realize that the tab on the bms can be unsoldered

https://youtu.be/rdIjopmCmRw

- de

@willie604

That’s interesting

Those tabs can be unsoldered if you use high temps :400-450 deg c

- de

@hellomacos Everythin was fine. The battery just needed to get plugged in and activated!!

- de

@willie604 That’s great to hear!

- de

Agregar un comentario

Añadir tu respuesta

Kevin W estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 7

Ultimos 30 días: 37

Todo El Tiempo: 443