Repara tus cosas Comunidad Tienda

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1502 Ver todo

Opciones

Power button replacement not working

Hi,

I did already fixed some Iphones, but this time I have no clue whats wrong. I replaced the powerbutton from an 3GS, the silverbutton was gone...(but still working)...

So I replaced the button like explained in the guide, but the new button does not move up or down, it is just stuck. The guide says the metal handle has to face down, I did all that. I can use the screws again to fix it and all, still the button itself is not moving/working? Anyone got an idea? I guess I simply overlooked something.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación -1
1 comentario

Thanks for the tips and will try it out asap. :)

- de

Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

They can be quire fiddly to install, I have done many myself. Also bear in mind that the rear case might be too tight around the power button. I have had a few where I have had to use a small file and make the power button hole a little bigger for the button to move in and out.

Also sometimes if the screws are done up too tight it can stop the button from operating correctly.

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

+..most times it's been overtight screws, they shouldn't be biting into the plastic but merely holding in place.

- de

Agregar un comentario

Añadir tu respuesta

edwood110 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 614