Saltar al contenido principal

Lanzado el 25 de septiembre de 2015. Modelo A1688 / A1633 . La reparación de este dispositivo es similar a las generaciones anteriores, que requieren destornilladores y herramientas de palanca. Disponible como GSM o CDMA / 16 , 64 , o 128 GB / plata, oro, gris espacio, o la opcion de oro rosa.

Preguntas 2695 Ver todo

Can I use phone after bending old battery during replacement?

While attempting to remove the battery from my iPhone 6s, the adhesive tabs were nowhere to be found. I tried to pry it up slowly, but ended up bending it a bit, and smelled a sweet smell that I believe is due to lithium leaking — while the battery was still in the phone. I've now finished removing the battery (by the end it was bent in a couple places and definitely smelled; I finished the removal outdoors and left it in a bucket of snow, but it didn't heat up at any point and never smoked or sparked).

What I'm wondering is: can I still use the phone itself (with a new battery, obviously)? If I wipe it down with a damp rag and it no longer has that sweet smell, is it safe to use? Is there something else I should do to make it safe?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

your phone should be fine.

the only concern is if you have previously disconnected the battery from the motherboard before you started trying to remove it. if not, there's the possibility that damaging the battery may have caused a current/voltage surge which could impact the motherboard. if it was disconnected first, the motherboard should be fine, as well as the rest of the phone.

Fue útil esta respuesta?

Puntuación 1

1 comentario:

Yes, I definitely disconnected it first. Thanks!!

- de

Agregar un comentario

Añadir tu respuesta

tannara estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 2

Ultimos 30 días: 10

Todo El Tiempo: 44