Repara tus cosas Comunidad Tienda

La primera revisión importante de Nintendo de la 3DS se lanzó en Japón en octubre de 2014 y en América del Norte en septiembre de 2015. La 3DS de 2015 presenta capacidades 3D mejoradas, un C-Stick y un nuevo conjunto de botones de activación.

Preguntas 91 Ver todo

Opciones

Can't get screws out

Trying to open my N3DS to replace the circle pad, but these two screws just don't move. I've looked up other versions of this question but sometimes they link to suggestions that include drilling which sounds like an extremely bad idea. I've heard about the screw extractor set but I want to know if these are even recoverable considering the warning on the one sold by ifixit.

Edit: A link showing the screw I could get out to the ones I can't.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0

2 comentarios:

Can you post a picture of fthe screwheads fir the screws in question (so we can see how stripped they are)? Agregar imágenes a una pregunta existente

- de

Yeah, added a new link comparing the screws I can get out and the screws I'm concerned about.

- de

Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

Drilling them out is usually a last resort. Try using a piece of cloth between your screws and screwdriver (make sure the bit doesn't slip through the threads). Turn as carefully as you can, and stop if you ever feel like you're making it worse

Fue útil esta respuesta?

Sí No
Puntuación 0
Agregar un comentario

Opciones

These screws are pretty stripped. When I had stripped screws, I used a Dremel blade to cut a slit into the screws, but that won't work for this device. I think the precision screw extractor set should work for this screw.

Imagen de Precision Screw Extractor Set

Producto

Precision Screw Extractor Set

$24.99

Fue útil esta respuesta?

Sí No
Puntuación 0

3 comentarios:

Ordered it then. Will report back when I get a chance to use it.

- de

Can't seem to get these to grip on anything. I'm going to see if I can talk with a local phone repair place before I end up returning these.

- de

@tsukiru Sounds like a good idea. If the screws are drilled out and the casing is damaged, you can always get a replacement shell.

- de

Agregar un comentario

Añadir tu respuesta

Tsukiru estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 13

Todo El Tiempo: 128