Repara tus cosas Comunidad Tienda

Modelo A1419 / EMC 2806 / Finales de 2014 o mediados de 2015. 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 finales de 2015 / 3.3 o 3.5 GHz Core i5 o 4.0 GHz Core i7 (iMac17,1) Todo con pantallas Retina 5K

Preguntas 573 Ver todo

Opciones

What's needed to upgrade storage on iMac 17,1 with SSD configuration?

Looking to upgrade a iMac Retina 5K with 4.0 GHz Core i7 (iMac17,1) that came configured with an Apple SM0512G SSD. I am planning to add a salvaged Samsung 850 EVO 2GB SATA SSD 2.5 inch. My questions follow:

1) System Report indicates an Apple SSD SM0512G on PCI protocol. Does this indicate the only drive is a blade NVMe in the PCIe slot?

2) Will I need any of the following components to successfully add the SATA SDD to the presumably-empty HDD slot?

a) SATA cable

b) mounting brackets

c) OWC thermal sensor

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

The SSD that is currently installed in your computer is a blade drive installed in the slot on the backside of the main logic board. To install an additional 2.5-inch SATA SSD, you will need to de-adhere the display carefully, remove the logic board, install the appropriate SATA cable, route the SATA cable and reinstall the logic board, install the appropriate mounting hardware for the 2.5-inch SSD, install the 2.5-inch SSD, then reinstall the display using adhesive tape. The SATA cables for these machines should be able to handle the temperature (I've never noticed any problems after installing 2.5-inch SSDs and have never needed a third-party temperature sensor for these models). Hope that helps!

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario

Añadir tu respuesta

Paul Strasma estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 4

Ultimos 30 días: 16

Todo El Tiempo: 126