Is it possible to save my ipad by swapping shells?

Question

iPad mini 4 Wi-Fi

Guías para la versión Wi-Fi del iPad Mini 4: modelo A1538. Anunciado el 9 de septiembre de 2015, el iPad Mini 4 es el sucesor del iPad Mini 3.

Preguntas 97 Ver todo

Frying_Pan @frying_pan

Rep: 1

Publicado: 8 de feb. de 2023

Opciones

Is it possible to save my ipad by swapping shells?

my ipad mini 4 has a worn out charging port, as in the physical port itself got widened out due to my mistake of leaving it on the charger basically 24/7. when i tried to repair it the guy there said due to how the model was put together, the port cant be repaired or something like that. so since i cant charge it and the problem is to do with the shell of the ipad, and not the components, would it be possible to take out the components and put it into a new shell? or take out whichever parts hold the data?

this ipad has sentimental value to me, which is why i wanna keep it instead of just buying a new one.

shell being the part that all the components are stored in, or just the outside of the ipad

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación 0

Agregar un comentario

2 Respuestas

Clay Eickemeyer @cashewclay Rep: 66.7mil 322 47 394 · Answer 1 · 2023-02-08T15:50:42-07:00

Respuesta Más Útil

Clay Eickemeyer @cashewclay

Rep: 66.7mil

322

47

394

Publicado: 8 de feb. de 2023

Opciones

If the metal area surrounding the connector is what's worn out, then swapping the shell is exactly what you'd need to do. However, I suspect that the worn out piece is the plastic housing around the actual lightning connector. In which case you have a couple options:

Replace the entire logic board. This is the simpler approach, but will disable Touch ID (unless you find and purchase a paired logic board and home button). NOTE: Your data is stored on the logic board. If you replace the logic board, you will need to back up and transfer your data to the iPad once you complete the repair.

Replace the lightning connector by soldering a new connector to the existing logic board. This isn't recommended unless you have micro-soldering skills and equipment. This will require removing the logic board as well.

Here is a community guide on micro-soldering tips.