Repara tus cosas Comunidad Tienda

Documentación de reparación para el mando DualSense de Sony PlayStation 5. Número de modelo: CFI-ZCT1W

Preguntas 81 Ver todo

Opciones

Faulty Headphone jack, only sound on right ear

Hello,

unfortunately my headphone jack is not working properly anymore. I wanted to stand up and go away but my leg was tangled in the cable of my headset and I didn’t notice. So the Controller flew away and hit the nearby table in a way that almost broke off the headset plugged into the headphone jack. This ended up destroying my headset and the headphone jack. Now I can only hear sound on the right side when I plug a new headset in. The only way I can hear sound left and right is when I push the headphone connector in a certain direction when it’s in the headphone jack. How could I probably fix this? Is there a way to bend the pins back inside the headphone jack?

Thank you in advance

Nik

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 2
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

Hi

You will need to ether replace the headphone jack on your controller of resolder a pin if one is loose

As I have said this is a soldering job so u would only recommend doing this if you have experience soldering very small things

You could replace the main board of the controller as well but that costs a lot for what your fixing

Here’s a link to the part you will need

https://www.ebay.co.uk/itm/234003568525?...

Hopefully this helps

Any questions please ask

Thanks:-)

Fue útil esta respuesta?

Sí No
Puntuación 2

2 comentarios:

Hey,

thank you for your answer and the link. Unfortunately I do not have any experience with soldering in general. I have inspected the headphone jack and it looks like it is very difficult to desolder and replace. To me it looks like you can’t even reach all joints with a soldering iron.

But I think I might try to replace it at some point in the future once I’ve gathered some experience with microsoldering.

Anyways, thank you again for helping me out!

- de

@Nik Name

No problem!

Let me know if there’s anything else I can help with:-)

- de

Agregar un comentario

Añadir tu respuesta

Nik Name estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 11

Ultimos 7 días: 50

Ultimos 30 días: 260

Todo El Tiempo: 1,702