Repara tus cosas Comunidad Tienda

Guías e información de reparación para batidoras Kenwood

Preguntas 103 Ver todo

Opciones

Mixer model kmx50 accelerate and slow down speed control no reaction

So far have replaced with new electrical module where all components are fitted together like speed control dial and capacitors and problem not solved, mixer it self have only three electrical components the main module and speed sensor and the corpse open sensor, there should be easy fix otherwise the motor is defective but is running continuesly at low speed so difficult to say is defective.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Respuesta Más Útil

Opciones

SOLVED UPDATE

Problem was the speed control sensor located above on the motor with three cables, never thought such tiny part make the stand mixer defective. This sensor is installed on more kmix models so if you have such issue then you know where to look.

Fue útil esta respuesta?

Sí No
Puntuación 2

1 comentario:

My mixer same thing, speeds up and then slows to 30%. The sensor between the fan and motor was rubbing on the magnet and wore away the hall effect sensor. I got a replacement item KW710626 about £10 and that fixed the problem. I fixed sensor board in place so sensor no longer rubs.

The hall effect sensor had marking 44e 106 if you want to find just the part to replace (3 legged small square device)

- de

Agregar un comentario

Añadir tu respuesta

George estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 14

Ultimos 30 días: 30

Todo El Tiempo: 465