Philips 60pfl6008h/12 has standby 3.5V, but cannot turn on
My Philips 60" TV just cannot turn on,
Standby pwer is ok, get 3.5V on pin 9 and 10, the LED light just blinking non stop.
like to know what is the problem and how to resolve it.
Update (12/24/2022)
I have connected back the SMPS board to the chassis, and checked all the supplies are normal on the IM90 connector. there is also a 24V to the back light LED driver baord and proced 65VDC too.
The front LED light blinking, the sequence is continues blink twice, and repeat.
Please advice how to repair it, thank you
Es esta una buena pregunta?
Puntuación
0
3 
Can you upload pictures of the circuit boards in the TV?
- de Andrew S