Saltar al contenido principal

Versión renovada del iPhone 3G con velocidades de procesamiento más rápidas. La reparación de este dispositivo es similar a la 3G y requiere destornilladores simples y herramientas de palanca. Modelo A1303 / 16 o 32 GB de capacidad / respaldo de plástico negro o blanco.

Preguntas 1502 Ver todo

Why has my backlight stopped working?

Last night i replaced the dock assembly and the battery on my 3gs due to water damage. When plugging it back in the backlight flickered but then continued to work until this morning when it completely stopped out of the blue.

Is there anyway to fix the problem?

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación -1
Agregar un comentario

1 Respuesta

Solución Elegida

leigh, that could be corrosion damage, a short circuited LCD or coil. Start by cleaning the phone using this guide. It was written for a 3G but will pertain to your phone as well. After that reevaluate. If you still hav nothing, you may need to replace your LCD or your coil. Check the traces on the logic board as well. If you need to replace anything , I'd start with the LCD unless you are handy with a soldering iron. Hope this helps, good luck

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

leigh estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 718