Saltar al contenido principal

El modelo más delgado, más fino y más silencioso de la PlayStation 2 (SCPH-7XXXX) lanzado por Sony en Septiembre de 2004.

Preguntas 89 Ver todo

Disc not spinning up

I recently bought a “for parts” ps2 slim on eBay that powered on but wouldn’t read discs. I figured it was an issue with the optical drive, so I tried reseating all of the ribbon cables and after pressing down both lid switches the laser started moving and focusing. I tested with a CD in and the motor wouldn’t spin, so I replaced the spindle motor with a new one. Same result. I then tried replacing the laser (and removing the solder joint) thinking maybe it couldn’t read the disk, but still the same result.

I’ve tested the fuses and PS13 seems to have a pretty high resistance of around 9 MOhms, while the others have less than 1 ohm. So I’m thinking about replacing that fuse. Is there anything else I can look for that might be keeping the motor from spinning? I’m having trouble finding any diagrams of this board.

Model number: SCPH-75001

Board version: GH-037-11

Thanks in advance!

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
Agregar un comentario

2 Respuestas

Hi

From what you have said it sounds like it’s time for a new disk drive

Since you replace most parts that rules out a lot of things so I would try a new or different disk drive

If a new disk drive doesn’t work I would try measuring around to check voltages ,just to see what’s happening on the board level

Hopefully this helps

Any questions please ask

Thanks:-)

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

My PS2 Slim SCPH-77001 is not spinning at all. When I close the lid it says "reading disc" for a second but then it just stops and the disc just simply won't spin. I already pushed both sensors with a disc inside and it just won't spin. Although the laser does moves but only when press the back sensor, but it doesn't light up at all. Since my laser moves like it normally does but it doesn't light up a red/blue color or anything, do you think the laser is the problem? I had to change a laser because the old one was not reading anything dvd silver games and I just remove the blob from the new laser.. what do I do?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Alex Cobb estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 18

Ultimos 30 días: 110

Todo El Tiempo: 1,700