Saltar al contenido principal

Repair guides and support for tablets produced by Lenovo including the ThinkPad tablet line.

Preguntas 425 Ver todo

Touch screen not working after LCD+Ribbon replacement

Hey guys

I have replaced the screen of a Lenovo Tab M8 (8505) in full with a working LCD screen due to the original being damaged.

The LCD works to display image fine but the touch doesn't register at all.

At the same time I done two of these devices, with the exact same parts, one works, so I tried swapping the ribbon cables + LCD/Screen from the working into this device, and the working one remained working and the other remained touchless, still. This to me confirms that both the new screen and existing ribbon cables are fine (since they all work on that one device).

I'm not totally sure the next direction to look at for the device with touch issues regardless of LCD/Screen+Ribbon cable, at a guess motherboard issues? I had a bit of a look and there are no shorts or missing components easily visible from the front side, and I've also done a factory reset to try and rule out software issues.

Does anyone else have any idea? Many thanks

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

U have done all things. This model has together with lcd and touch panel ? Anyway try to place hardly flex cable. I mean unplug and plug flex cables.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Añadir tu respuesta

Luke estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 26