Repara tus cosas Comunidad Tienda

Modelo A1312 / Mediados de 2010 / 3.2 GHz Core i3 o 2.8 y 3.6 GHz Core i5 o 2.93 GHz Core i7, ID iMac11,3

Preguntas 383 Ver todo

Opciones

Diagnostic LED 1 blinks once

so i’ve recently been given a Mid 2010 27” iMac that wasn’t powering on. Initially i thought i must most probably be the Power supply that had croaked it and needed to be replaced because when i plug in the power the diagnostic LED 1 flashes once then once again but not as bright that second time, as if it was loosing power. No other LEDs are lit.

I have replaced the PSU with a known working unit but still getting the same thing.

im hoping its not the logic board that has an issue or a short on it,

is there any chance it would be the jack/EMI unit where the power goes into the imac?

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

1 Respuesta

Filtrar por:
Mas Útiles Más Reciente Más antiguo

Opciones

You have a short within the logic board and/or the MXM video board.

My money is on the video board! Do you have the correct one to test things?

Otherwise its following the power rails with a DVM and a set of schematics and boardview drawings.

Fue útil esta respuesta?

Sí No
Puntuación 0

2 comentarios:

Thanks! But darn was really hoping for the video board being the issue. Removed it but am still getting the same problem.

Must be a short on the logic board then.

- de

@ahkoo - Follow the yellow brick road ;-}

Get a DVM and a set of schematics and boardview drawings following the power rails and check the caps.

You might want to find someone with the deeper skills to help you.

- de

Agregar un comentario

Añadir tu respuesta

Ahkoo estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 14

Todo El Tiempo: 183